How much Adya Clarity should I add?

The amount depends on the quality and type of water used. We recommend a dilution ratio of 1:1000. To calculate the amount of Adya Clarity you need, divide the volume of water by 1000.

Amount of Adya Clarity added = (Volume of water/1000)

E.g. (1000 mL of water/ 1000) = 1 mL of Adya Clarity = 1/5 tsp  = 20 drops

For polluted water, you may need to add a few more drops or up to a tsp to remove all contaminants. If the water source is believed to be extremely contaminated by known or unknown toxic substances, proper laboratory analysis will be required in order to give accurate dilution rates.

The water may turn cloudy or change color 1 - 5 minutes after adding Adya Clarity, as the dissolved contaminants are precipitating out of the water.


Recommended Dosage per 1.3 Gallons of Water 

Tap water 1 - 2 tsp
Filtered water 1 tsp
Spring water


 ½ tsp

Distilled water

When treating a small amount of water, we recommend adding 5 - 8 drops for every 8 oz of water.
Volume of water Recommended Dosage
8 oz 5 - 8 drops of Adya Clarity from a dropper bottle
16 oz 10 drops
32 oz (1 quart) 20 drops